118 cg01-j application specific capacitors high frequency ceramic capacitors ma/mb series outstanding characteristics miniature size very high q at high frequencies high rf power capabilities impervious to environmental conditions low dissipation factors excellent retrace capability (not applicable for x7r styles) high temperature stability low noise meets mil-55681 with respect to: shock, vibration, moisture resistance, solderability, barometric pressure, temperature cycling, immersion and salt spray additional features packaging options lot processing data available ma series for filtering, coupling and impedance matching in most rf circuits, the ma series chips and leaded devices offer outstanding performance and reliability with the greatest range of values and configurations. ma series capacitors can be supplied with military equivalent screening. please consult our factory. ma series ceramic fixed capacitors are miniature, high performance precision components having extremely high q and high power capabilities from low frequencies to gigahertz ranges. these ?ow loss?multilayer capacitors are extremely stable with respect to variations in temperature, voltage and frequency. ma series capacitors are designed for miniature state-of-the-art circuit applications. they are small, easy to apply and have excellent reliability. units are available in ultra-miniature case size 1 (1.4 x 1.4 x 1.4mm) or miniature case size 2 (2.8 x 2.8 x 2.5mm). standard case size 1 units are available as chips. standard case size 2 units are available as chips and also in leaded configurations. clean-room manufacturing technology assures product reliability and automated processing reduces costs and cycle time. key stages of the operation are monitored and controlled with the latest spc techniques. flexibility in design allows the production of non-standard values, while maintaining consistent quality objectives. please contact the factory for availability of special configurations or high-reliability screening. m a 1 8 101 j a n cubic a-std series dimensional termination capacitance tolerances: a: no 7 reel monolithic b-ultra and t.c. code code: code: expressed *b: ?.1pf marking plastic high q 1: p90 case 1 0: chip in picofarads and *c : ?.25pf b: marking tape 5: cog case 1 1: pellet identified by a three-digit *d: ?.5pf cap. code 7: x7r case 1 2: microstrip number. first two digits f : ?% & tol. 2: p90 case 2 3: radial ribbon represent significant g: ?% logo if space 6: cog case 2 4: radial wire figures. last digit j : ?% permits 8: x7r case 2 5: axial ribbon specifies the number k : ?0% non xr7 6: narrow axial ribbon of zeros to follow. for m: ?0% styles only 7: axial wire values below 10pf, z: +80%, ?0% 8: nickel interfaced pellet the letter ??is used 9: nickel interfaced chip as the decimal point *available and the last digit below 10pf becomes significant. only part numbering system ?case size 1 & case size 2 type dimensions: mm style p9020 p9030 cog x7r configuration l 0.38* w 0.38* t .038 band termination y silver ribbon: raised ma22-6 mb22-6 ma62-6 ma82-6 length: 6.35 typical micro-strip 3.4 2.8 2.8 0.38 .25 width: 2.3 .13 thickness: 0.1 .05 special lead configuration for flex boards note: targeted for flex circuit boards, the ma22-6 version of the ma22 has an upraised lead configuration. the lead bends when flexing the board after assembly so that minimal stress is placed on the component. t w l y new
fig. 1 chip fig. 5 radial wire fig. 2 pellet fig. 6 axial ribbon fig. 3 micro-strip fig. 7 narrow axial ribbon fig. 4 radial ribbon fig. 8 axial wire dimensions y l t w l w t y t w l y w l y t w l y t y w l t y w l t y w l t *except where tolerance is shown. lead lengths are typical widths ?.1mm, thickness & dia. ?.05mm. all leaded parts are bonded w ith high temperature solder 748?/398?. cg01-j 119 application specific capacitors application specific capacitors high frequency ceramic capacitors ma/mb series configuration and dimensions ?ma & mb series type case dimensions: mm band style p9020 p9030 cog x7r figure size configuration l 0.38* w 0.38* t max. y termination chip ma10 ma50 ma70 1 1.4 .25 palladium silver pellet ma11 ma51 ma71 2 1 palladium silver eia 1.8 & sn62 solder nickel interfaced style max. 1.4 .25 1.4 0.25 palladium silver, pellet ma18 ma58 ma78 2 0505 .1 nickel interface & sn62 solder nickel interfaced palladium silver, chip ma19 ma59 ma79 1 1.4 .25 nickel interface & tin plating chip ma20 mb20 ma60 ma80 1 2.8 palladium silver pellet ma21 mb21 ma61 ma81 2 3.3 max. palladium silver, & sn62 solder micro ma22 mb22 ma62 ma82 3 3.4 silver ribbon: strip 6.35 x 2.3 x 0.1mm radial ma23 mb23 ma63 ma83 4 3.4 silver ribbon: ribbon 6.35 x 2.3 x 0.1mm radial ma24 mb24 ma64 ma84 5 2 3.8 #26awg silver wire: wire eia 12.7 x 0.4mm dia. axial ma25 mb25 ma65 ma85 6 style 3.4 2.8 2.5 0.38 silver ribbon: ribbon 1010 .25 6.35 x 2.3 x 0.1mm narrow axial ma26 mb26 ma66 ma86 7 3.4 silver ribbon: ribbon 6.35 x 1.25 x 0.1mm axial ma27 mb27 ma67 ma87 8 3.8 #26awg silver wire: wire 12.7mm x 0.4mm dia. nickel interfaced palladium silver, pellet ma28 mb28 ma68 ma88 2 3.3 max. nickel interface & sn62 solder nickel interfaced palladium silver, chip ma29 mb29 ma69 ma89 1 2.8 nickel interface & tin plating
application specific capacitors miniature microwave ceramic capacitors 120 cg01-j ma10 & 50 series, p90 & cog ?case size 1 ma70 series, x7r ?case size 1 macase size 1 series cap. cap. cap. wvdc * code pf tol. 0r1 0.1 b 150 0r2 0.2 150 0r3 0.3 b,c 150 0r4 0.4 150 0r5 0.5 b,c,d 150 0r6 0.6 150 0r7 0.7 150 0r8 0.8 150 0r9 0.9 150 1r0 1.0 150 1r1 1.1 150 1r2 1.2 150 1r3 1.3 150 1r4 1.4 150 1r5 1.5 150 1r6 1.6 150 1r7 1.7 150 1r8 1.8 150 1r9 1.9 150 2r0 2.0 150 2r2 2.2 150 2r4 2.4 150 2r7 2.7 150 3r0 3.0 150 3r3 3.3 150 3r6 3.6 150 3r9 3.9 150 4r3 4.3 150 *@ 125? **extended cap range, cog only cap. cap. cap. wvdc * code pf tol. 680 68 f,g,j,k,m 150 750 75 150 820 82 150 910 91 150 101 100 150 111** 110 50 121** 120 50 131** 130 50 151** 150 50 161** 160 50 181** 180 50 201** 200 50 221** 220 50 241** 240 50 271** 270 50 301** 300 50 331** 330 50 361** 360 50 391** 390 50 431** 430 50 471** 470 50 511** 510 50 561** 560 50 621** 620 50 681** 680 50 751** 750 50 821** 820 50 911** 910 50 102** 1000 50 *@ 125 c cap. cap. cap. wvdc * code pf tol. 4r7 4.7 b,c,d 150 5r1 5.1 150 5r6 5.6 150 6r2 6.2 150 6r8 6.8 b,c,j,k,m 150 7r5 7.5 150 8r2 8.2 150 9r1 9.1 150 100 10 f,g,j,k,m 150 110 11 150 120 12 150 130 13 150 150 15 150 160 16 150 180 18 150 200 20 150 220 22 150 240 24 150 270 27 150 300 30 150 330 33 150 360 36 150 390 39 150 430 43 150 470 47 150 510 51 150 560 56 150 620 62 150 *@ 125 c cap. cap. cap. wvdc *** code pf tol. 511 510 k,m,z 50 561 560 50 621 620 50 681 680 50 751 750 50 821 820 50 911 910 50 102 1000 50 112 1100 50 122 1200 50 132 1300 50 ***@ 85 c cap. cap. cap. wvdc *** code pf tol. 152 1500 k,m,z 50 162 1600 50 182 1800 50 202 2000 50 222 2200 50 242 2400 50 272 2700 50 302 3000 50 332 3300 50 362 3600 50 392 3900 50 ***@ 85 c cap. cap. cap. wvdc *** code pf tol. 432 4300 k,m,z 50 472 4700 50 512 5100 50 562 5600 50 622 6200 50 682 6800 50 752 7500 50 822 8200 50 912 9100 50 103 10000 50 ***@ 85 c
ma20 & 60 series, p90 & cog ?case size 2 ma80 series, x7r ?case size 2 ma case size 2 series cg01-j 121 cap. cap. cap. wvdc * code pf tol. 0r1 0.1 b 500 0r2 0.2 500 0r3 0.3 b,c 500 0r4 0.4 500 0r5 0.5 b,c,d 500 0r6 0.6 500 0r7 0.7 500 0r8 0.8 500 0r9 0.9 500 1r0 1.0 500 1r1 1.1 500 1r2 1.2 500 1r3 1.3 500 1r4 1.4 500 1r5 1.5 500 1r6 1.6 500 1r7 1.7 500 1r8 1.8 500 1r9 1.9 500 2r0 2.0 500 2r1 2.1 500 2r2 2.2 500 2r4 2.4 500 2r7 2.7 500 3r0 3.0 500 3r3 3.3 500 3r6 3.6 500 3r9 3.9 500 4r3 4.3 500 4r7 4.7 500 5r1 5.1 500 5r6 5.6 500 6r2 6.2 500 6r8 6.8 b,c,j,k,m 500 *@ 125? **extended cap range, cog only cap. cap. cap. wvdc ** code pf tol. 512 5100 k,m,z 100 562 5600 100 622 6200 100 682 6800 100 752 7500 100 822 8200 100 912 9100 100 103 10000 100 113 11000 100 123 12000 100 133 13000 100 **@ 85? cap. cap. cap. wvdc ** code pf tol. 153 15000 k,m,z 100 163 16000 100 183 18000 100 203 20000 100 223 22000 100 243 24000 100 273 27000 100 303 30000 100 333 33000 100 363 36000 100 393 39000 100 **@ 85? cap. cap. cap. wvdc ** code pf tol. 433 43000 k,m,z 100 473 47000 100 513 51000 100 563 56000 100 623 62000 100 683 68000 100 753 75000 100 823 82000 100 913 91000 100 104 100000 100 **@ 85? cap. cap. cap. wvdc * code pf tol. 7r5 7.5 500 8r2 8.2 b,c,j,k,m 500 9r1 9.1 500 100 10 f,g,j,k,m 500 110 11 500 120 12 500 130 13 500 150 15 500 160 16 500 180 18 500 200 20 500 220 22 500 240 24 500 270 27 500 300 30 500 330 33 500 360 36 500 390 39 500 430 43 500 470 47 500 510 51 500 560 56 500 620 62 500 680 68 500 750 75 500 820 82 500 910 91 500 101 100 500 111 110 300 121 120 300 131 130 300 151 150 300 161 160 300 181 180 300 *@ 125? cap. cap. cap. wvdc * code pf tol. 201 200 300 221 220 200 241 240 f,g,j,k,m 200 271 270 200 301 300 200 331 330 200 361 360 200 391 390 200 431 430 200 471 470 200 511 510 100 561 560 100 621 620 100 681 680 50 751 750 50 821 820 50 911 910 50 102 1000 50 112** 1100 50 122** 1200 50 132** 1300 50 152** 1500 50 162** 1600 50 182** 1800 50 202** 2000 50 222** 2200 50 242** 2400 50 272** 2700 50 302** 3000 50 332** 3300 50 362** 3600 50 392** 3900 50 432** 4300 50 472** 4700 50 512** 5200 50 *@ 125? application specific capacitors miniature microwave ceramic capacitors application specific capacitors note: limited capacitance range available in 1kv; consult factory.
mb20 ~ 29 series, p90 30 ?case size 2 application specific capacitors miniature microwave ceramic capacitors mb case size 2 series 122 cg01-j cap. cap. cap. wvdc * code pf tol. 0r4 0.4 b,c 1000 0r5 0.5 b,c,d 1000 0r6 0.6 1000 0r7 0.7 1000 0r8 0.8 1000 0r9 0.9 1000 1r0 1.0 1000 1r1 1.1 1000 1r2 1.2 1000 1r3 1.3 1000 1r4 1.4 1000 1r5 1.5 1000 1r6 1.6 1000 1r7 1.7 1000 1r8 1.8 1000 1r9 1.9 1000 2r0 2.0 1000 2r1 2.1 1000 2r2 2.2 1000 2r4 2.4 1000 2r7 2.7 1000 3r0 3.0 1000 3r3 3.3 1000 3r6 3.6 1000 3r9 3.9 1000 *@ 125? cap. cap. cap. wvdc * code pf tol. 470 47 f,g,j,k,m 300 510 51 300 560 56 300 620 62 300 680 68 100 750 75 100 820 82 100 910 91 100 101 100 100 *@ 125? cap. cap. cap. wvdc * code pf tol. 4r3 4.3 b,c,d 1000 4r7 4.7 1000 5r1 5.1 1000 5r6 5.6 1000 6r2 6.2 1000 6r8 6.8 b,c,j,k,m 1000 7r5 7.5 1000 8r2 8.2 1000 9r1 9.1 1000 100 10 f,g,j,k,m 500 110 11 500 120 12 500 130 13 500 150 15 500 160 16 500 180 18 500 200 20 500 220 22 500 240 24 500 270 27 500 300 30 500 330 33 500 360 36 500 390 39 500 430 43 500 *@ 125?
cg01-j 123 application specific capacitors high frequency ceramic capacitors ma/mb series specifications ma/mb 18/28; 0.05% maximum dissipation factor ma 58/68; 0.15% maximum @ 1.0vrms (f = 1 mhz) ma 78/88; 2.5% maximum @ 1.0vrms maximum (f = 1khz) mb28 series p90 30ppm/?, (?5? to +175?) ma 18/28 series p90 20ppm/?, (?5? to +125?) temperature coefficient ma 58/68 series; cog (0 30ppm/ c, 55 c to +125 c) ma 78/88 series; 15% maximum ( 55 c to +125 c) ma/mb 18/28 1000k m ohms at +25 c, 100k m ohms at +125 c insulation resistance ma 58/68 1000k m ohms at +25 c, 100k m ohms at +125 c ma 78/88 100k m ohms or 1000 m ohm f min., whichever is less (@ 25 c) 10k m ohms or 100 m ohms f min., whichever is less (@ 125 c) dielectric test voltage ma/mb 18/28/58/68/78/88, 250% of wvdc for 5 seconds capacitance drift meets or exceeds mil-prf-55681 (does not apply for ma 78/88) aging negligible for ma/mb 18/28/58/68, ma 78/88; 2.5% per decade maximum environmental tests mil-std-202 shock method 213, condition j vibration method 204, condition b moisture resistance method 106 solderability method 208 immersion method 104, condition b barometric pressure method 105, condition b resistance to soldering heat method 210, condition b thermal shock method 107, condition a life method 108, condition f marking standard ma/mb product is unmarked dimensions: mm tape and reel packaging conductive tape electrical properties packaging: case 1 3,000 pcs. case 2 1,000 pcs. note: 1 ao & bo are determined by maximum specified length and width of components plus 0.016 0.008, plus the additional requirement that components not be allowed to rotate more than 20 within the cavity clearance or whichever condition occurs first. cover tape embossment embossed carrier 1.75 0.1 3.5 0.05 8.0 0.3 4.0 0.1 2.0 0.1 unit: mm 1.5 +0.1 0 4.0 0.1 a 0 b 0 direction of feed 2.75 advantages benefits conductive prevents static charge build-up flexibility insures against crazing, cracking and brittleness dimensional strength drive loading will not elongate sprocket holes dimensional stability smooth, reliable running on pick and place machines property value test method resistivity 5 x 10 5 ohm/square astm d-257 electrostatic decay time 0.01 sec. astm d-257 at 50% rh@21 c other packaging options available ?consult factory typical values application specific capacitors
|
